A new toy..

I’ve never been too excited about live picture/video capturing. Have always considered myself a “still image” type of guy. Looks like that may change…

Marko had recently acquired a GoPro Hero4 Session camera and attached Ram Mount hardpoints where to install the camera on his kayak.

The GoPro Hero4 Session is a camera produces to my uneducated eye actually pretty decent net worthy video! Also it is pretty darn small!! In addition it has only TWO buttons to operate!! This is borderline limit for my feeble mind to comprehend.  Sounds like something I may learn to use?

The kit is pretty small. From left to right: GoPro remote, RamMount 6" Mount, GoPro Hero 4 session camera, Holder for the GoPro Hero 4 session camera with Ram Mount adapter ball for the Go Pro.
The kit is pretty small. From left to right: GoPro remote, RamMount 6″ Mount, GoPro Hero 4 session camera, Holder for the GoPro Hero 4 session camera with Ram Mount adapter ball for the Go Pro.

Also the Camera can be  operated with a separately sold remote control, OR a smart phone app. So if the camera is further away from the operator, one can still start and stop the filming!  This can be handy on a kayak!

I have the understanding that these GoPro Devices are reasonably robust and actually may operate successfully in marine conditions.. so this might be  working formula!

1" Ram mount ball on bow of the Beaufort
1″ Ram mount ball on bow of the Beaufort

The 1 inch ram mount B- size balls are reasonably low in profile, yet sturdy for intended use , particularly this small camera and has a large selection of adapters, gadgets etc available and whats best these were all  available from Finland without complicated, unsure, expensive “order from abroad and pay taxes” spiel!

1" Ball on the stern
1″ Ball on the stern

I acquired the necessary parts from local company nearby with excellent service and which pretty much covers the whole Ram Mount catalog of parts available: Yepnet. Whats best, the whole package was under 100€!! This hardly ever happens in Finland anymore!

Camera installed on the stern hardpoint. The white line is the DIY safety line for the camera. It will be attached onto the deckline.
Camera installed on the stern hardpoint. The white line is the DIY safety line for the camera. It will be attached onto the deckline.

Installation of the hardpoints was easy/hard. I used SS M4 Hardware + White SikaFlex 291i to attach the Ram Mount balls on the bow and stern. Evereything  else was easy apart from holding back the nuts while tightening the screws. Here and additional pair of hands was necessary.

So.. now I have another toy to play around with.. and if all goes well I might actually have some videos to post at a later date.. Ofcourse before that I will have to try to learn the complex world of digtalvideo editing! 😉